MAD/3/ADDPORTFAIL: Failed to add the Excluded interface
because the port cannot be configured. (Interface=[STRING], Reason=[STRING])
Description
Failed to configure the reserved port.
Parameters
Parameter Name
Parameter Meaning
Interface
Indicates the interface name.
Reason
Indicates the failure cause.
Possible Causes
Cause 1: The number of configured reserved ports reached the threshold.
Cause 2: The configuration was incorrect and some ports (for example, stack ports) cannot
be configured as reserved ports.
Procedure
Run the display mad
proxy command to check whether the configured port
can be configured as a reserved port.
If so, go to step 2.
If not, run the undo
mad exclude command to cancel unnecessary reserved
ports, and go to step 2.
Check whether the number of configured reserved ports reached
the threshold.
If so, run the undo
mad exclude command to cancel unnecessary reserved
ports, and go to step 3.
If not, go to step 3.
Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.