MBR/5/MODEUNI2ALONE

Message

MBR/5/MODEUNI2ALONE: The uni-mng AS mode changes to the stand-alone mode.

The device is changed from the client mode to the standalone mode.

Parameter Name	Parameter Meaning
None	None

1. The device working in client mode does not join the SVF system within 10 minutes after restarting and is changed to the standalone mode.

2. A command is executed to change the device from the client mode to the standalone mode.

3. When the device in client mode starts, a configuration file is detected or input is detected on the console port during configuration restoration.

1. The device working in client mode does not join the SVF system within 10 minutes after restarting and is changed to the standalone mode.
1. Check whether the connection between the parent and client is normal.
2. Check whether the parent works normally.
2. A command is executed to change the device from the client mode to the standalone mode.
This log is informational and no action is required.
3: When the device starts in client mode, a configuration file is detected or there is output on the serial port during configuration recovery.
Clear the configuration file of the device or ensure that there is no output on the serial port during configuration recovery.