MCAST/3/MCAST_MVPN

Message

MCAST/3/MCAST_MVPN:Failed to add the ACL which is used to modify destination MAC for MVPN. (GroupIp=[IPADDR], SourceIp=[IPADDR], ReturnCode=[ULONG])

Description

The system failed to deliver an ACL used to change the destination MAC address in MVPN application.

Parameters

Parameter Name	Parameter Meaning
GroupIp	Indicates a multicast group address.
SourceIp	Indicates a multicast source address.
ReturnCode	Indicates an error code.

Possible Causes

The device has a large number of ACL-based services, such as traffic policies. These services have used up all ACL resources, so no more ACL can be delivered.

Procedure

Run the display acl resource command to check whether the ACL resources have been used up.
Run the display current-configuration command to check whether a large number of traffic policies have been configured on the device.
Delete unnecessary ACL configuration.
Check whether the log is still recorded.
If the log is still recorded, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.