MDNS/4/MDNS_INFO_LOG_MDNS_SET_ACL_FAILED

Message

MDNS/4/MDNS_INFO_LOG_MDNS_SET_ACL_FAILED(l):Set ACL failed.(Command: [STRING])

An mDNS command failed to be delivered because of an ACL processing failure.

Parameter Name	Parameter Meaning
[STRING]	Indicates the command that triggers this log: mdns gateway enable undo mdns gateway enable mdns relay enable undo mdns relay enable mdns snooping enable undo mdns snooping enable

Parameter Name

Parameter Meaning

[STRING]

Indicates the command that triggers this log:

ACL resources were insufficient or an error occurred in ACL processing on the device.

Process this log based on the triggering command.
- If the log is triggered by the mdns snooping enable, mdns gateway enable, or mdns relay enable command configuration, run the display acl resource command to check whether ACL resources are sufficient. If ACL resources are insufficient, release ACL resources and run the display acl resource command to check whether ACL resources are released successfully. If resources are sufficient, the physical chip fails to deliver the command. Go to step 2.
- If the log is triggered by the undo mdns snooping enable, undo mdns gateway enable, or undo mdns relay enable command configuration, an error occurs in ACL processing on the device. Go to step 2.
Collect log and configuration information, and contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.