MLD/4/SET_MLD_INTPLC_FAIL

Message

MLD/4/SET_MLD_INTPLC_FAIL:In VPN instance "[vpn-instance-name]", failed to set the MLD application policy for interface [interface-name]. (FlCode=[STRING][ULONG])

Description

Failed to set the MLD application policy on the interface.

Parameters

Parameter Name	Parameter Meaning
[vpn-instance-name]	Indicates the name of a VPN instance.
[interface-name]	Indicates the name of an interface.
FlCode	Indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to deliver the interface application policy when MLD was configured on the interface.

Procedure

Run the undo mld enable command and reconfigure MLD on the interface.
If this log message is generated after each reconfiguration, contact technical support personnel.