MPLS/3/VSI_ADD_CARACL

Message

MPLS/3/VSI_ADD_CARACL: Failed to configure traffic suppression because of insufficient resource. (SlotId=[STRING])

Description

Failed to configure traffic suppression because the ACL resources are insufficient.

Parameters

Parameter Name	Parameter Meaning
SlotId	Specifies the slot ID.

Possible Causes

When you configure VSI traffic suppression, the device needs to deliver ACL rules to the interface boards. When the ACL resources of a specified interface board are insufficient, VSI traffic suppression cannot be configured.

Procedure

Run the display acl resource [ slot slot ] command to view information about ACL resources, including ACL4 and ACL6 resources.
Run the display current-configuration command to check the current configuration on the switch.
Check the services that occupy ACL resources based on ACL resource information and the current configuration as follows, and delete unnecessary services to release ACL resources.
- Check whether NAC, IPSG, MQC, and ACL-based simplified traffic policy services that occupy a large amount of ACL resources exist on the switch.
- Check the services that occupy ACL resources based on fields in the ACL resource information. For example, MQC, ACL-based simplified traffic policy, SVF, MPLS, and BFD for VPLS services occupy UDF ACL resources. If a large amount of UDF ACL resources are occupied, check these services first.
If the fault persists, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.