MRM/3/CHECKSOCKET_E

Message

MRM/3/CHECKSOCKET_E:In VPN instance "[vpn-instance-name]", MRM failed to check socket ID [protocol-name]. The error code was [error-code]. (FlCode=[STRING][ULONG])

Description

The MRM module on the slave board failed to check the socket ID.

Parameters

Parameter Name	Parameter Meaning
[vpn-instance-name]	Indicates the name of a VPN instance.
[protocol-name]	Indicates the name of the protocol. The value can be: GMP PIM MRM PUBLIC
[error-code]	Indicates the error code. The value can be: 1040657: Fail to allocate memory. 1048660: Fail to allocate sockets. 1048662: The task ID is invalid. 1048663: The instance number is invalid. -22: The parameter is invalid. -107: There is no TCB structure.
FlCode	Indicates the name of the source code file and the line number of this log message.

Possible Causes

Programs on the slave board or cooperative programs on the master or slave board are processed abnormally, causing the socket ID to be incorrect.

The socket does not support the checking operation.

Procedure

Restart the slave board.
Run the undo multicast routing-enable command or the undo multicast ipv6 routing-enable command to delete multicast configurations, and then reconfigure related multicast commands.