NSADP/4/NS_ID_CREATEFAIL

Message

NSADP/4/NS_ID_CREATEFAIL: Netstream Fails to create streams in slot [slot-id]. (FailedInputStreamCount=[STRING], FailedOutputStreamCount=[STRING])

NetStream flows failed to be created.

Parameter Name	Parameter Meaning
slot-id	Indicates a slot ID.
FailedInputStreamCount	Indicates the number of inbound NetStream flows that failed to be created.
FailedOutputStreamCount	Indicates the number of outbound NetStream flows that failed to be created.

The number of NetStream flows has reached the maximum value allowed by the device.

Run the display netstream all command to check the NetStream configuration on the device. If ip netstream inbound or ip netstream outbound is found on an interface, NetStream has been configured on this interface.
Run the ip netstream sampler fix-packets packet-interval { inbound | outbound } command in the view of the NetStream-enabled interface to increase the NetStream sampling ratio, and then check whether the log is still generated.
- If the log is still generated, go to step 3.
- If the log is no longer generated, no further action is required.
If NetStream original flow statistics collection is configured on the device, change it to NetStream flexible flow statistics collection and check whether the log is still generated. For detailed NetStream configuration, see "NetStream Configuration" in the S2720, S5700, and S6700 V200R019C10 Configuration Guide - Network Management and Monitoring.
- If the log is still generated, go to step 4.
- If the log is no longer generated, no further action is required.
Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.