OSPFV3/4/NBR_FLAP_SUPPR_STATUS

Message

OSPFV3/4/NBR_FLAP_SUPPR_STATUS: The status of peer flapping suppress is changed.(ProcessId=[USHORT], AreaId=[STRING], ifName=[STRING], SuppressStatus=[STRING], LastSuppressStatus=[STRING])

Description

The status of OSPFv3 neighbor relationship flapping suppression changed on the local interface.

Parameters

Parameter Name	Parameter Meaning
ProcessId	Process ID
AreaId	Area ID
ifName	Interface name
SuppressStatus	Suppression status
LastSuppressStatus	Original suppression mode

Possible Causes

OSPFv3 neighbor relationship flapping suppression started on the local interface, or the interface exited from the suppression.

Procedure

Check whether frequent interface flapping occurs.
- If frequent interface flapping occurs, this trap message is informational only and no action is required.
- If no frequent interface flapping occurs, go to Step 2.
Run the reset ospfv3 process-id suppress-flapping peer [ interface-type interface-number ] [ notify-peer ] command to force the interface to exit from OSPFv3 neighbor relationship flapping suppression.
End.