OSPF/4/CONFLICT_ROUTERID_INTRA

Message

OSPF/4/CONFLICT_ROUTERID_INTRA:OSPF Router id conflict is detected on intra-area. (ProcessId=[USHORT], RouterId=[IPADDR], AreaId=[IPADDR], NbrInterfaceIp1=[IPADDR], NbrInterfaceIp2=[IPADDR])

Description

A router ID conflict was detected in an OSPF area.

Parameters

Parameter Name	Parameter Meaning
ProcessId	Indicates the ID of a process.
RouterId	Indicates the router ID of a router.
AreaId	Indicates the ID of an area.
NbrInterfaceIp1	Indicates the IP address of the neighbor 's interface.
NbrInterfaceIp2	Indicates the IP address of the neighbor 's interface.

Possible Causes

At least two indirectly routers were configured with the same router ID, causing router LSAs to be constantly refreshed. As a result, route flapping occurs.

Procedure

Run the ospf router-id router-id command to change the router ID.
End.