OSPF/4/PEER_FLAPPING_SUPPRESS

Message

OSPF/4/PEER_FLAPPING_SUPPRESS: The status of peer flapping suppress is changed.(ProcessId=[USHORT], AreaId=[IPADDR], ifName=[STRING], SuppressPreviousStatus=[STRING], SuppressCurrentStatus=[STRING])

Description

The status of OSPF neighbor relationship flapping suppression changed on the local interface.

Parameters

Parameter Name	Parameter Meaning
ProcessId	Process ID
AreaId	Area ID
ifName	Interface name
SuppressPreviousStatus	Suppression previous status
SuppressCurrentStatus	Suppression current status

Possible Causes

OSPF neighbor relationship flapping suppression started on the local interface, or the interface exited from the suppression.

Procedure

Check whether frequent interface flapping occurs.
- If frequent interface flapping occurs, this trap message is informational only and no action is required.
- If no frequent interface flapping occurs, go to Step 2.
Run the reset ospf process-id suppress-flapping peer [ interface-type interface-number ] [ notify-peer ] command to force the interface to exit from OSPF neighbor relationship flapping suppression.
End.