< Home

OSPF/6/SHAMLINK_IF_CHG_E

Message

OSPF/6/SHAMLINK_IF_CHG_E:Shamlink interface [shamlink-interface-address] received event [interface-event], interface state changed from [interface-previous-state] to [interface-current-state]. (ProcessId=[USHORT])

Description

The interface on the sham link [Slink-int] changed from the state [pre-state] to the state [cur-state] after receiving an event [event].

Parameters

Parameter Name Parameter Meaning

[shamlink-interface-address]

Indicates the IP address of the interface on the sham link.

[interface-event]

Indicates the events on the interface.

[interface-previous-state]

Indicates the previous status of the interface.

[interface-current-state]

Indicates the current status of the interface.

ProcessId

Indicates the ID of an OSPF process.

Possible Causes

The status of the interface on the shame link changed.

Procedure

  1. Run the display ospf interface command to check status of the interface.
  2. Contact technical support personnel.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >