OSPFV3_1.3.6.1.4.1.2011.5.25.147.0.9 hwOspfv3RestartStatusChange

Description

OSPFV3/3/RESTARTSTATUSCHANGE:OID [oid] The graceful restart status of the router has changed. (RouterId=[gauge], State=[integer], RestartInterval=[integer], RestartExitReason=[integer])

The GR status of the switch changed.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.147.0.9	Minor	processingErrorAlarm(4)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
RouterId	Indicates the Router-ID of the local node. The value is a decimal integer.
State	Indicates the restart status. 1: Down 2: Attempt 3: Init 4: 2-Way 5: Exstart 6: Exchange 7: Loading 8: Full
RestartInterval	Indicates the interval of GR.
RestartExitReason	Indicates the cause why the switch exits from the GR. 1: None 2: In progress 3: Completed 4: Time out 5: Topology change

Impact on the System

This trap indicates that a switch enters the GR state or exists from the GR state. GR failure will affect the normal forwarding of routes.

Possible Causes

1. OSPFv3 exited from GR.

2. The GR period exceeded the set value.

3. OSPFv3 GR is reset.

Procedure

Run the display ospfv3 graceful-restart-information command to check the cause of becoming the GR and the current GR status.
Perform the following operations as required:
- If the active/standby switchover is performed manually or the OSPFv3 process is restarted in GR mode, go to Step 4.
- If this trap is generated without any manual operation, go to Step 3.
- If the reset ospfv3 graceful-restart command is executed, go to Step 4.
Collect alarm information and configuration information, and then contact technical support personnel.
End.

Related Information

None