POE_1.3.6.1.4.1.2011.5.25.195.40.20 hwPoePowerAbsent

Description

POE/4/POEPWABSENT: OID [OID] PoE power is absent. (FrameID=[INTEGER], SlotID=[INTEGER])

An alarm is triggered when no PoE power supply on a PoE device is working properly.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.195.40.20	Warning	equipmentAlarm(5)

Name	Meaning
OID	Indicates the MIB object ID of the alarm.
FrameID	Indicates the chassis ID of a device in a stack.
SlotID	Indicates the slot ID of the PoE power supply.

Services are not affected.

No PoE power supply on the PoE device is working properly.

Run the display device command to check whether power modules of the PWR or PWH type are properly installed.
- If not, install a PoE power module. The alarm handling ends.
- If so, go to step 2.
Run the display poe information command to check whether the power of the PoE power module is in the normal range.
- If so, collect alarm information and configuration information, and then contact technical support personnel.
- If not, replace this PoE power module.