QSFP-40G-SR-BD
Item |
Description |
|---|---|
Transceiver form factor |
QSFP+ |
Transmission speed |
40GE |
Center wavelength (nm) |
850, 900 |
Standards compliance |
40GBASE-BIDI (non-standard) |
Connector type |
LC |
Applicable cable and maximum transmission distance |
|
Transmit power (dBm) |
-4 to +5 |
Maximum receiver sensitivity (dBm) |
-4.5 |
Overload power (dBm) |
5 |
Extinction ratio (dB) |
4.5 |
Operating temperature |
10°C to 70°C (50°F to 158°F) NOTICE:
Temporary interruption or packet loss may occur on ports of the switch if the operating temperature is below 10°C (50°F). |
Part number |
02311FPA |
QSFP-40G-SR-BD optical modules cannot be used for CSS or stack connection before the V200R019C10SPC500 version.
QSFP-40G-SR-BD optical modules do not support some digital diagnostic monitoring (DDM) function.
This module can only be used on a switch running V200R009C00 or a later version. A switch running an earlier version may fail to obtain information about this module.