RIP/3/ADD_RTE_F

Message

RIP/3/ADD_RTE_F: Because of unsuccessful validation, routes not added to database. Total [number] occurrences since [date] [time]. (Destination=[IPADDR]/[STRING], Interface=[STRING], ProcessId=[ULONG])

Description

Failed to add routes to the database due to unsuccessful validation.

Parameters

Parameter Name	Parameter Meaning
[number]	Indicates the number of failed attempts to authenticate RIP routes and install RIP routes to the database.
[date]	Indicates the date when the last RIP classful node was added to the update list.
[time]	Indicates the time when the last RIP classful node was added to the update list.
Destination	Indicates the destination IP address.
Interface	Indicates the interface name.
ProcessId	Indicates the process ID.

Possible Causes

Failed to add routes to the database due to unsuccessful validation.

Procedure

Run the display diagnostic-information command, save the command output.
Collect log information and configuration information, and then contact technical support personnel.