< Home

RMON_1.3.6.1.4.1.2011.1.3.4.0.2 prifallingAlarm

Description

RMON/3/FALLING:OID [oid] Private alarm table [alram-line-index] monitors [description] with the sample type being [sample-type], and the sampled alarm value [alarm-value] is less than or equal to [alarm-upper-limit].

The value of the alarm entity was lower than prialarmFallingThreshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.1.3.4.0.2

Minor

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

alram-line-index

Indicates the index of the alarm entry.

description

Indicates the description of the alarm entry.

sample-type

Indicates the type of the sampled alarm.

alarm-value

Indicates the alarm value.

alarm-upper-limit

Indicates the lower threshold of the alarm.

Impact on the System

System will not be affected.

Possible Causes

Cause 1:

If the current sampled value was less than or equal to this threshold, and the last sampled value was greater than this threshold, the alarm was generated.

Cause 2:

After this alarm entry became valid, when the first sampled value was less than or equal to this threshold, and the values of fallingAlarm, risingAlarm, and risingOrFallingAlarm were equal, the alarm was generated.

Procedure

  • This alarm is triggered only when the lower alarm monitoring threshold configured using the rmon prialarm command is reached. It is a user-configured monitoring alarm and does not affect services. Therefore, no action is required.

Related Information

None.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic