RM/4/INST_RCH_MAX_RT6_LMT

Message

RM/4/INST_RCH_MAX_RT6_LMT:The number of routes in IPv6 [vpn-instance-name] was [current-number], which reached or exceeded the maximum value [max-value]. (InstanceId=[ULONG], AcceptOrRejectFlag=[STRING])

Description

The number of routes in a specific IPv6 VPN instance reached or exceeded the upper limit.

Parameters

Parameter Name	Parameter Meaning
[vpn-instance-name]	Indicates the name of an IPv6 VPN instance.
[max-value]	Indicates the maximum number of routes.
[current-number]	Indicates the current number of routes.
InstanceId	Indicates the ID of an IPv6 VPN instance.
AcceptOrRejectFlag	Indicates the flag representing whether it is allowed or rejected to add routes. The values are as follows: Accept: indicates that adding routes is allowed. Reject: indicates that adding routes is rejected.

Possible Causes

The number of routes in a specific IPv6 VPN instance reached or exceeded the upper limit.

Procedure

Run the display ipv6 routing-table [ vpn-instance vpn-instance-name ] statistics command to check the total number and types of routes in this IPv6 VPN instance.
Analyze the source of each route and check whether the number of current routes in the IPv6 VPN instance meets the requirement.
- If so, go to Step 4.
- If not, go to Step 3.
Delete unnecessary private routes, and then check whether the number of routes still reaches or exceeds the alarm threshold.
- If so, go to Step 5.
- If not, go to Step 6.
Enter the IPv6 VPN instance view and run the display this command to check the configuration of routing-table limit to check whether the set alarm threshold of private routes is proper.
- If so, go to Step 5.
- If not, run the routing-table limit number { alert-percent | simply-alert } command to reconfigure a proper alarm threshold. Then, go to Step 6.
Collect log information and configuration information, and then contact technical support personnel.
End.