RSVP_1.3.6.1.4.1.2011.5.25.148.1.12.2.5 hwRsvpTeIfNbrThresholdExceed

Description

RSVP/3/RSVPIFNBRTHRESHOLDEXCEED: OID [oid] The number of RSVP neighbors exceeded the threshold. (hwRsvpTeIfName=[octet], hwRsvpTeIfNbrCurrentCount=[integer], hwRsvpTeIfNbrThreshold=[integer], hwRsvpTeIfNbrTotalCount=[integer])

The proportion of configured RSVP neighbors to all supported ones reached the upper alarm threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.148.1.12.2.5	Minor	qualityOfServiceAlarm(3)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
hwRsvpTeIfName	Name of an RSVP interface
hwRsvpTeIfNbrCurrentCount	Number of existing RSVP neighbors
hwRsvpTeIfNbrThreshold	Threshold (percent) of RSVP neighbors that device supports
hwRsvpTeIfNbrTotalCount	Maximum number of RSVP neighbors that a device supports

Impact on the System

If new RSVP neighbors are created after the proportion of configured RSVP neighbors to all supported ones on a specified interface has reached the upper alarm threshold, services may be affected.

Possible Causes

The proportion of configured RSVP neighbors to all supported ones on a specified interface reached the upper threshold.

Procedure

Check the hwRsvpTeIfName field and obtain information about the interface on which the alarm is generated.
Check whether hwRsvpTeIfNbrThreshold is set in a specified range. (Setting hwRsvpTeIfNbrThreshold to 80% of hwRsvpTeIfNbrTotalCount is recommended. A smaller value leads to useless threshold-crossing alarms to be generated.)
- If the value is within the specified range, go to Step 4.
- If the value is out of the specified range, go to Step 3.
Run the mpls rsvp-peer-number threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value command to set the alarm threshold. Then check whether the alarm is cleared.
- If the alarm is cleared, go to Step 6.
- If the alarm persists, go to Step 4.
Run the undo mpls rsvp-te command in the interface view to delete unwanted RSVP interface configurations or delete unwanted RSVP interface configurations on the peer interface to reduce the number of RSVP neighbors. Then check whether the alarm is cleared.
- If the alarm is cleared, go to Step 6.
- If the alarm persists, go to Step 5.
Collect alarm information and configuration information, and then contact technical support personnel.
End.

Related Information

RSVP_1.3.6.1.4.1.2011.5.25.148.1.12.2.6 hwRsvpTeIfNbrThresholdExceedClear