RSVP/3/RECONSTRUCT_LSP_FAIL

Message

RSVP/3/RECONSTRUCT_LSP_FAIL:Cannot reconstruct RSVP states for LSP. (EgressAddress=[STRING], SessionId=[USHORT], IngressAddress=[STRING], LspId=[USHORT])

Description

Failed to restore the LSP.

Parameters

Parameter Name	Parameter Meaning
EgressAddress	Indicates the egress address.
SessionId	Indicates the session ID.
IngressAddress	Indicates the ingress address.
LspId	Indicates the LSP ID.

Possible Causes

Failed to use the received GR message to reestablish PSB or RSB. Possible causes are as follows:

1. The system had insufficient memory.

2. Routing information on the SMB was lost.

3. The TTL value was smaller than 1.

4. The system detected a loop.

Procedure

This log message is informational only, and no action is required.