< Home

SEA/4/SIP_RES_FULL

Message

SEA/4/SIP_RES_FULL: Failed to add the session entry because the number of entries has reached the upper limit (ULONG). (CallID=[ULONG1], SrcIp=[STRING1], Sport=[ULONG2], Pro=[ULONG3], DevMAC=[STRING2], SrcMAC=[STRING3], DstMAC=[STRING4], ReasonCode=[ULONG4], Type=[STRING5], Time=[STRING6])

Description

A SIP session failed to be created because the number of SIP session entries had reached the maximum.

Parameters

Parameter Name Parameter Meaning
(ULONG) Indicates the maximum number of SIP session entries.
CallID Indicates the session ID.
SrcIp Indicates the source IP address of SIP packets.
Sport Indicates the source port number of SIP packets.
Pro Indicates the protocol number of SIP packets.
DevMAC Indicates the MAC address of the device.
SrcMAC Indicates the source MAC address of SIP packets.
DstMAC Indicates the destination MAC address of SIP packets.
ReasonCode Indicates the reason why the SIP session entry fails to be created.
  • 1: eMDI resources are insufficient.
  • 2: The number of SIP session entries has reached the maximum.
Type Indicates the type of media streams.
  • audio
  • video
Time Indicates the timestamp.

Possible Causes

The number of SIP session entries has reached the maximum.

Procedure

  1. Run the display sea all command in the diagnostic view to check whether the number of SIP session entries has reached the maximum. If so, a new SIP session can be created only when an existing session ends.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic