SECE_1.3.6.1.4.1.2011.5.25.165.2.2.2.13 hwArpIfRateLimitBlockALarm

Description

SECE/4/ARP_RATELIMIT_BLOCK_ALARM: OID [oid] All arp packets will be blocked on interface [OCTET], block time [INTEGER] seconds.

After rate limiting on ARP packets is configured, the rate of ARP packets exceeds the rate limit.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.165.2.2.2.13	Warning	securityServiceOrMechanismViolation(10)

Name	Meaning
[oid]	Indicates the MIB object ID of the alarm.
OCTET	Indicates the interface name.
INTEGER	Indicates the time ARP packets are blocked.

All the ARP packets received on the interface are discarded.

The rate of ARP packets received on the interface exceeds the rate limit.

If user services are not affected, the alarm does not need to be handled.
If the user services are intermittently disconnected, run the arp anti-attack rate-limit packet packet-number command in the interface view to adjust the ARP rate limit. Adjusting the rate limit may affect CPU usage. You are advised to contact technical support personnel.

None