SECE_1.3.6.1.4.1.2011.5.25.165.2.2.2.2 hwARPSEntryCheck

Description

SECE/4/ARP_ENTRY_CHECK: OID [oid] Arp entry attack. (SourceInterface=[OCTET], SourceIP=[OCTET], SourceMAC=[OCTET], OuterVlan=[INTEGER], InnerVlan=[INTEGER])

The system detects attack packets used to modify ARP entries.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.165.2.2.2.2	Warning	equipmentAlarm(5)

Parameters

Name	Meaning
OID	Indicates the MIB object ID of the alarm.
SourceInterface	Indicates the source interface of packets.
SourceIP	Indicates the source IP address of packets.
SourceMAC	Indicates the source MAC address of packets.
OuterVlan	Indicates the outer VLAN ID of packets.
InnerVlan	Indicates the inner VLAN ID of packets.

Impact on the System

If this alarm is generated, ARP entries on the device may be changed to ARP entries of attackers. As a result, user traffic is intercepted by attackers and user services are interrupted.

Possible Causes

The device is attacked by packets used to modify ARP entries.

Procedure

Find the interface where attacks occur according to SourceInterface.
Check whether users who are not in the DHCP snooping binding table range are connected to the interface.
If new users are connected, run related DHCP snooping commands to generate the DHCP snooping binding table. Then find the interface where the gateway conflict occurs according to the value of SourceInterface.

Related Information

None