SECE_1.3.6.1.4.1.2011.5.25.165.2.2.2.4 hwARPSDaiDropALarm

Description

SECE/4/DAI_DROP_ALARM: OID [oid] The packet number dropped by DAI reaches [INTEGER], exceed the alarm threshold [INTEGER], Interface [OCTET].

The number of packets discarded by Dynamic ARP Inspection (DAI) exceeds the alarm threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.165.2.2.2.4	Warning	equipmentAlarm(5)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
INTEGER1	Indicates the number of discarded packets.
INTEGER2	Indicates the alarm threshold.
Interface	Indicates the VLAN, source MAC address, and source IP address of packets

Impact on the System

If this alarm is generated, the device may be attacked. If the attack traffic volume is heavy, the device is busy processing attack packets. As a result, services of authorized users are interrupted.

Possible Causes

The number of packets discarded by DAI exceeds the alarm threshold. By default, the alarm threshold for ARP packets discarded by DAI is 100 packets.

Procedure

If user services are not affected, the alarm does not need to be handled.
If user services are interrupted, perform the following operations:
1. Run the display dhcp static user-bind { { interface interface-type interface-number | ip-address ip-address | mac-address mac-address | vlan vlan-id } ^* | all } [ verbose ] or display dhcpv6 static user-bind { { interface interface-type interface-number | ipv6-address { ipv6-address | all } | mac-address mac-address | vlan vlan-id } ^* | all } [ verbose ] command to check the static binding entries.
2. Find out the interface and user host that initiate the attack. Check whether the host is attacked. If not, the host belongs to the attacker. Take measures to defend against the attack, for example, disconnect the attacker's host.
3. Collect alarm and configuration information, and contact technical support personnel.

Related Information

None