SECE/4/ICMP_INTF_RATELIMIT

Message

SECE/4/ICMP_INTF_RATELIMIT: The rate of ICMP packets on the interface exceeded the limit. (SourceInterface=[STRING], Threshold=[ULONG] packets per second)

Description

The rate of IGMP packets on an interface has exceeded the rate limit.

Parameters

Parameter Name	Parameter Meaning
SourceInterface	Indicates the source interface of ICMP packets.
Threshold	Indicates the rate limit for ICMP packets.

Possible Causes

The rate of ICMP packets received on an interface exceeds the configured rate limit.

Procedure

If responses to ping operations are affected due to a small rate limit for ICMP packets on the interface, run the icmp rate-limit interface interface-type interface-number threshold threshold-value command to increase the rate limit on the interface.
If the number of ICMP packets received on the interface exceeds the global upper rate limit, run the icmp rate-limit total threshold threshold-value command to increase the global rate limit of ICMP packets, in addition to increasing the rate limit of ICMP packets on the interface.