SECE/4/OLC_DELAY_TASK

Message

SECE/4/OLC_DELAY_TASK: Task is delayed because cpu is overloaded on the board in slot [STRING]. (Task=[STRING], RunTime=[ULONG] ms, DelayTime=[ULONG] ms)

Description

The CPU usage reached the OLC start threshold, and the monitored task was delayed.

Parameters

Parameter Name	Parameter Meaning
slot	Indicates the slot ID.
Task	Indicates the task name.
RunTime	Indicates the task running time, in milliseconds.
DelayTime	Indicates the delay in processing the task, in milliseconds.

Possible Causes

A large amount of traffic of a monitored task was sent to the CPU or an attack was initiated.

Procedure

Run the display cpu-usage command to view the current CPU usage.
Run the display cpu-overload-control statistics command to view OLC statistics to locate the task that is delayed.
If the CPU usage is within the acceptable range, run the undo cpu-overload-control task enable command to disable the OLC function for the task. Otherwise, no further action is required.