SECE/3/STRACK_RESOURCE_LACK

Message

SECE/3/STRACK_RESOURCE_LACK: Resource for [STRING1] in slot [STRING2] is not enough.

Description

The resource for attack source tracing is insufficient.

Parameters

Parameter Name	Parameter Meaning
[STRING1]	Indicates the service type.
[STRING2]	Indicates a slot ID.

Possible Causes

The discard action in attack source tracing is implemented using ACL resource. The deny action fails to be delivered because the ACL resource is insufficient.

Procedure

Run the display acl resource [ slot slot ] command to view information about ACL resources, including ACL4 and ACL6 resources.
Run the display current-configuration command to check the current configuration on the switch.
Check the services that occupy ACL resources based on ACL resource information and the current configuration as follows, and delete unnecessary services to release ACL resources.
- Check whether NAC, IPSG, MQC, and ACL-based simplified traffic policy services that occupy a large amount of ACL resources exist on the switch.
- Check the services that occupy ACL resources based on fields in the ACL resource information. For example, MQC, ACL-based simplified traffic policy, SVF, MPLS, and BFD for VPLS services occupy UDF ACL resources. If a large amount of UDF ACL resources are occupied, check these services first.
If the fault persists, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.