SFP-10G-ZDWT
Item |
Description |
|---|---|
Transceiver form factor |
SFP+ |
Transmission speed |
10GE |
Center wavelength (nm) |
1529.16 to 1560.61 |
Standards compliance |
10GBASE-DWDM |
Connector type |
LC |
Applicable cable and maximum transmission distance |
Single-mode fiber: 60 km |
Transmit power (dBm) |
-1 to +3 |
Maximum receiver sensitivity (dBm) |
-24 |
Overload power (dBm) |
-1 |
Extinction ratio (dB) |
8.2 |
Operating temperature |
0°C to 70°C (32°F to 158°F) |
Part number |
02310YUT |
This module can only be used on a switch running V200R009C00 or a later version. A switch running an earlier version may fail to obtain information about this module.
The optical module takes a long time to start. Therefore, a low optical power alarm may be generated when such an optical module is installed on a switch.