SOCKET/1/BINDPEERIP:Failed to bind the peer IP because a socket with same state already existed.
Description
Failed to bind the peer IP address because a socket in the system had the same status as that of the current socket.
Parameters
Parameter Name
Parameter Meaning
None
None
Possible Causes
1. The peer IP address was repeatedly set.
2. The system had a socket with the same local IP address, local port number, remote
IP address, remote port number, and VPN index as that of the socket to be set.
Procedure
The log is generated when the system faces an unknown fault. The fault causes the relevant routing protocol unavailable. Then you need disable the routing protocol and then enable it.