SOCKET/6/FGETVPNNAME

Message

SOCKET/6/FGETVPNNAME:The current socket failed to obtain the VPN name. (ErrorCode=[ULONG])

Description

The current socket failed to acquire the VPN name.

Parameters

Parameter Name	Parameter Meaning
ErrorCode	Indicates an error code. The error codes are shown as follows 4: indicates that the input parameter is invalid. 5: indicates that the VRF name is inexistent. 7: indicates that the VRF is in the inactive state.

Parameter Name

Parameter Meaning

ErrorCode

Indicates an error code. The error codes are shown as follows

4: indicates that the input parameter is invalid.

5: indicates that the VRF name is inexistent.

7: indicates that the VRF is in the inactive state.

Possible Causes

A socket was closed, and then the VPN information about the closed socket was recorded into the log. During the process to acquire the VPN information, a fault occurred, and the relevant VPN information could not be acquired.

Procedure

This log message indicates a normal situation, and no action is required.