SPM/4/NO_SLEEP: The device cannot enter the sleeping state. (Reason=[STRING])
Description
The device cannot enter the sleeping state.
Parameters
Parameter Name
Parameter Meaning
Reason
Indicates the reason why the device cannot enter the sleeping state.
Possible Causes
When the interval between the sleeping start time and end time is less than 10 minutes, the device will not enter the sleeping state.
Procedure
Run the display power manage sleep configuration command to check whether the interval between the sleeping start time and end time is less than 10 minutes according to the Time-range field.
If so, go to step 2.
If not, collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
Run the sleep time-rangetimerange-name command to set the interval between the sleeping start time and end time to be more than 10 minutes.