SRM_1.3.6.1.4.1.2011.5.25.129.2.1.9 hwEntityInvalid 68080

Description

SRM/3/ENTITYINVALID: OID [oid] I2C is abnormal. (EntityPhysicalIndex=[INTEGER1], BaseTrapSeverity=[INTEGER2], BaseTrapProbableCause=[INTEGER3], BaseTrapEventType=[INTEGER4], EntPhysicalContainedIn=[INTEGER5], EntPhysicalName=[OCTET1], RelativeResource=[OCTET2], ReasonDescription=[OCTET3])

The I2C was faulty.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.129.2.1.9	Minor	equipmentAlarm(5)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
EntityPhysicalIndex	Indicates the index of an entity.
BaseTrapSeverity	Indicates the alarm severity.
BaseTrapProbableCause	Indicates the possible causes of an alarm.
BaseTrapEventType	Indicates the type of an alarm.
EntPhysicalContainedIn	Indicates the index of a parent entity.
EntPhysicalName	Indicates the name of an entity.
RelativeResource	Indicates the entity-related resources.
ReasonDescription	Indicates the reason description of an alarm.

Impact on the System

One or more interfaces do not work normally.

Possible Causes

The I2C has failed.

Procedure

Switch services from the interfaces affected by the I2C failure to interfaces that can work normally. If you still want to use an affected interface, rectify the I2C fault, and then run the clear configuration interface interface-type interface-num command to clear interface configuration and reconfigure the interface.
If the fault cannot be rectified and services cannot be switched to normal interfaces, replace the device.

Related Information

SRM_1.3.6.1.4.1.2011.5.25.129.2.1.10 hwEntityResume 68080