SRM/3/ENTITYINVALID: OID [OID] PHY chip abnormal. (EntityPhysicalIndex[INTEGER1], BaseTrapSeverity=[INTEGER2], BaseTrapProbableCause=[INTEGER3], BaseTrapEventType=[INTEGER4], EntPhysicalContainedIn=[INTEGER5], EntPhysicalName=[OCTET1], RelativeResource=[OCTET2], ReasonDescription=[OCTET3])
This alarm was generated when the chip was detected abnormal.
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.129.2.1.9 | Minor | equipmentAlarm(5) |
| Name | Meaning |
|---|---|
| oid | Indicates the MIB object ID of the alarm. |
| EntityPhysicalIndex | Entity index. |
| BaseTrapSeverity | Severity code. |
| BaseTrapProbableCause | Error code. |
| BaseTrapEventType | Code of the event type. |
| EntPhysicalContainedIn | Entity code. |
| EntPhysicalName | Entity name. |
| RelativeResource | Name of the affected component. |
| ReasonDescription | Fault description. |
The services on the interface corresponding to the faulty PHY chip are interrupted.
(1) If not, it indicates that the PHY chip is faulty. In this case, you need to replace the device.
(2) If so, go to Step 4.
(1) If you do not use the interface, no action is required.
(2) If you need to use the interface, go to Step 3.
(1) If not, it indicates that the PHY chip is faulty. In this case, you need to replace the device.
(2) If so, go to Step 4.