SRM/3/CARD_RESET: The card reset [STRING](Slot=[ULONG],
Card=[ULONG], Reason=[STRING]).
Description
The subcard was reset.
Parameters
Parameter Name
Parameter Meaning
STRING
Indicates whether the subcard was reset successfully.
Slot
Indicates the stack ID.
Card
Indicates the subcard ID.
Reason
Indicates the subcard reset reason.
Possible Causes
The subcard was reset after the CPLD on the subcard
failed detection for three consecutive times.
Procedure
Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.