<
Home
SRM/3/FANPLUGOUT
Message
SRM/3/FANPLUGOUT:Fan in slot [ULONG] is pulled out.
Description
A fan is removed.
Parameters
Parameter Name
Parameter Meaning
ULONG
Indicates the slot ID of the fan.
Possible Causes
The fan is not installed properly.
The fan is removed manually.
Procedure
Run the
display fan
command to check whether the fan module is installed properly.
If so, go to step 2.
If not, install the fan properly.
Rectify the fault according to "
A Fan Fails
" in the
Troubleshooting Insights - Campus Switch - Hardware Fault
.