SRM/3/INOUT:The optical module on interface [STRING1]
is plugged [STRING2].
Description
The optical module on the interface is installed or
removed.
Parameters
Parameter Name
Parameter Meaning
STRING1
Indicates the interface number.
STRING2
Indicates the optical module status, in or out.
This parameter determines whether the optical module is installed
or removed.
Possible Causes
An optical module is installed into or removed from
an interface. Each CSFP optical module occupies
two interfaces; therefore, two logs are generated when a CSFP optical
module is removed.
Procedure
If the optical module is removed and installed for routine
maintenance, no action is required.
If the optical module is working normally, no action is
required.
If the optical module is not working normally, it may be
loose. Remove and install it again.