< Home

SRM/1/POWEXC1

Message

SRM/1/POWEXC1: Power supply in slot [ULONG] is abnormal, or no current input.

Description

A power failure occurs.

Parameters

Parameter Name Parameter Meaning
ULONG Indicates the slot ID.

Possible Causes

  • The built-in power supply of the device is removed.
  • The built-in power supply of the device does not provide power.

Procedure

  1. Run the display power command to check whether the power module is installed properly.
    • If so, go to step 2.
    • If not, install the power supply properly.
  2. Rectify the fault according to "A Power Module Cannot Provide Power" in the Troubleshooting Insights - Campus Switch - Hardware Fault.
Parent Topic: SRM
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >