SSH/4/SSH_FAIL: Failed to login through SSH. (IP=[STRING], VpnInstanceName=[STRING], UserName=[STRING], Times=[ULONG], FailedReason=[STRING])
| Parameter Name | Parameter Meaning |
|---|---|
| IP | IP address of the SSH user |
| VpnInstanceName | Name of a VPN instance. |
| UserName | User name of the SSH user |
| Times | Number of login failures |
| FailedReason | Cause for the login failure |
An SSH user failed to log in. Information, including the IP address, user name, and numbers of the login failures, was logged.
Run the display ssh user-information command to view the authentication mode of the SSH user.
If the authentication mode is ECC, RSA or DSA, run the user-interface vty command to enter the VTY channel to which the user attempts to log in.
Run the display this command to check whether the SSH user is an administrator.
If the SSH user is not an administrator, run the user privilege level command to set the SSH user to an administrator.
If the authentication mode is not ECC, RSA or DSA, run the aaa command to enter the AAA view. If the SSH user is authenticated by a remote server, set the SSH user to an administrator on the remote server.
Run the display this command to check whether the SSH user is authenticated by a remote or local server.
If the SSH user is authenticated by a local server and the SSH user is not an administrator, run the user privilege level command to set the SSH user to an administrator.
If the SSH user is authenticated by a remote server, set the SSH user to an administrator on the remote server.