SW_SNPG/3/VLAN_NUM_WRONG:VLAN number is wrong. (VlanNumber=[LONG])
Description
When the switch runs N-to-N multicast VLAN replication,
the number of user VLANs is incorrect.
Parameters
Parameter Name
Parameter Meaning
VlanNumber
Indicates the number of VLANs.
Possible Causes
An error occurs in software processing.
Procedure
Run the display igmp-snoopingvlan [ vlan-id ] configuration command to check the
IGMP snooping configuration. Find the VLANs that are no longer used
based on the command out, and then run the undo igmp-snooping
enable command in views of these VLANs to disable
IGMP snooping.
Re-configure many-to-many multicast VLAN replication. If
this log persists, go to step 3.
Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.