< Home

SYSMIB_1.3.6.1.4.1.2011.5.25.19.2.9 hwSysSlaveSwitchFailNotification

Description

SYSMIB/3/SWITCH_FAIL:OID [oid] Slave switchover fail.

Failed to perform the master-slave switchover.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.19.2.9 Minor equipmentAlarm(5)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Impact on the System

System will not be affected.

Possible Causes

  • The master-slave switchover function is not enabled on the device.

  • The slave main control board is unavailable.

  • An error causes the master-slave switchover to be failed.

Procedure

  1. Run the display current-configuration command to check whether the master-slave switchover function is enabled on the device.

    • If so, go to Step 4.

    • If not, go to Step 2.

  2. Run the display device command to check whether the slave main control board on the device is unavailable.

    • If so, go to Step 4.

    • If not, go to Step 3.

  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.

Related Information

None.

Parent Topic: SYSMIB
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >