TPLMNG/3/CMDEXECFAIL

Message

TPLMNG/3/CMDEXECFAIL: Failed to execute the command. (Command="[STRING]", Reason=[STRING])

Description

The command failed to be executed.

Parameters

Parameter Name	Parameter Meaning
Command	Indicates the command that failed to be executed.
Reason	Indicates the failure cause.

Possible Causes

When the commit as all command was executed for batch operation, topology collection was not completed or other operations were performed on some ASs. As result, the batch operation failed on these ASs.

Procedure

Run the display uni-mng commit-result command to find the ASs on which the batch operation failed.
Run the commit as command to deliver service configurations to these ASs again.
If the fault persists, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.