TRUNK_1.3.6.1.4.1.2011.5.25.41.3.39 hwExtTrunkMemberCountExceedThreshold

Description

TRUNK/4/MEMBER_COUNT_EXCEED_THRESHOLD: OID [OID] The number of members of the Eth-Trunk in LACP mode exceeded the upper threshold.(UpperThreshold=[INTEGER])

The number of the member interfaces of an Eth-Trunk interface in LACP mode exceeded the upper threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.41.3.39	Warning	other(1)

Parameters

Name	Meaning
OID	Indicates the MIB object ID of the alarm.
UpperThreshold	Upper threshold for the number of the member interfaces of an Eth-Trunk interface in LACP mode

Impact on the System

Services will not be affected.

Possible Causes

The number of the member interfaces of an Eth-Trunk interface in LACP mode exceeded the upper threshold.

Procedure

Run the display eth-trunk command to check whether the member interfaces of all Eth-Trunks that work in LACP mode are being used in Up state and have traffic. If there is any member interface that is not being used, run the undo eth-trunk command in the corresponding interface view to configure the member interface to leave the Eth-Trunk that works in LACP mode. Check whether the alarm is cleared.
- If the alarm is cleared, go to Step 3.
- If the alarm persists, go to Step 2.
Collect alarm information and configuration information, and then contact technical support personnel.
End.

Related Information

TRUNK_1.3.6.1.4.1.2011.5.25.41.3.40 hwExtTrunkMemberCountExceedThresholdResume