CM/4/USER_ADDCOSFAIL:The class of service cannot
be added for NAC users. Ensure that the system resource is sufficient.
([STRING])
Description
The service class cannot be set for a user. Check whether
system resources are sufficient.
Parameters
Parameter Name
Parameter Meaning
[STRING]
Indicates the user IP and MAC address.
Possible Causes
The COS failed to be delivered to the physical chip
because of the chip error.
Procedure
Run the display acl resource command to check whether
ACL resources on the device are
sufficient.
If not, release some ACL resources.
If so, this fault is caused by other lower-layer causes. Go to
Step 2.
Collect log information and configuration information,
and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.