CM/0/VM_USER_ADDACLFAIL:The ACL cannot be added
for VM users. Ensure that this ACL is supported by the VM service.
([STRING])
Description
ACL-based authorization fails for a virtual user. Check
whether the configured ACL is supported.
Parameters
Parameter Name
Parameter Meaning
[STRING]
Indicates the user ID and MAC address.
Possible Causes
The delivered ACL is not included in the RADIUS attribute document.
The ACL failed to be delivered to the physical chip because of
the chip error.
Procedure
Run the display access-useruser-iduser-number command to check
whether the authorized ACL is supported according to the RADIUS attribute
document.
If not, deliver the ACL included in the RADIUS attribute document
to the user. Run the display access-useruser-iduser-number command to check
whether the ACL is delivered successfully.
If so, the ACL fails to be delivered to the physical chip. Go
to step 2.
Collect log information and configuration information,
and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.