USBLOAD_1.3.6.1.4.1.2011.5.25.129.2.1.10 hwEntityResume

Description

USBLOAD/4/UsbPlugOut: OID [oid] u-disk plug out. (EntityPhysicalIndex=[INTEGER], BaseTrapSeverity=[INTEGER], BaseTrapProbableCause=[INTEGER], BaseTrapEventType=[INTEGER], EntPhysicalContainedIn=[INTEGER], EntPhysicalName=[OCTET], RelativeResource=[OCTET], ReasonDescription=[OCTET])

The USB flash drive is removed from the device.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.129.2.1.10	Warning	equipmentAlarm(5)

Parameters

Name	Meaning
OID	Indicates the MIB object ID of the alarm.
EntityPhysicalIndex	Entity index.
BaseTrapSeverity	Severity code.
BaseTrapProbableCause	Error code.
BaseTrapEventType	Code of the event type.
EntPhysicalContainedIn	Entity code.
EntPhysicalName	Entity name.
RelativeResource	Name of the affected component.
ReasonDescription	Fault description.

Impact on the System

If the USB-based deployment is complete, the normal USB-based deployment process ends. If the USB-based deployment is being performed, the deployment fails.

Possible Causes

The USB flash drive is removed from the device.

Procedure

No action is required. To start the USB-based deployment process again, insert the USB flash drive into the device.

Related Information

USBLOAD_1.3.6.1.4.1.2011.5.25.129.2.1.9 hwEntityInvalid