VBST/4/EDGEPORT: Edged-port [port-name]
received BPDU packet, then the active state of the edged-port will
be disabled.
Description
The edge port lost the attributes of an edge port after
receiving BPDUs.
Parameters
Parameter Name
Parameter Meaning
[port-name]
Indicates the name of edge port.
Possible Causes
The edge port received BPDUs.
Procedure
Check whether the interface is directly connected to a
user terminal and can be specified as an edge port.
If the interface is directly connected to a user terminal and
therefore can be specified as an edge port, go to Step 2.
If the interface is indirectly connected to a user terminal and
therefore cannot be specified as an edge port, go to Step 3.
Locate the source of the BPDUs on the interface and check
whether the malicious attack exists.
If the malicious attack exists, go to Step 4.
If the malicious attack does not exist, go to Step 3.
Run the undo stp
edged-port command and the undo shutdown command in the interface view to delete the configuration
of the edge port and restart the interface. Then, check whether the
log persists. If the log persists, go to Step 4.
Collect trap, log, and configuration information, and contact technical support personnel.