< Home

VBST/3/VLANERR

Message

VBST/3/VLANERR: Because the limit of STP instances is exceeded, VLAN: [vlan-id] failed to enable.

Description

When VBST is enabled in VLANs in a batch, the VLANs where VBST fails to be enabled are recorded.

Parameters

Parameter Name Parameter Meaning
[vlan-id] VLAN ID.

Possible Causes

There are limitations on VLAN specifications. When VBST is enabled in VLANs in a batch, VBST fail to be enabled in some VLANs.

Procedure

  1. Run the display stp brief command to check the VLANs where VBST is enabled. Check whether the number of VLANs exceeds the specifications.

    If the number of VLANs does not exceed the specifications, go to step 2.

  2. Collect traps, logs, and configuration, and contact technical support personnel.
Parent Topic: VBST
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic