VRRP/2/VRRPMASTERDOWN:OID [oid] The state of VRRP changed from master to other state. (VrrpIfIndex=[VrrpIfIndex], VrId=[VrId], IfIndex=[IfIndex], IPAddress=[IPAddress], NodeName=[NodeName], IfName=[IfName], CurrentState=[CurrentState], ChangeReason=[ChangeReason])
The VRRP backup group was changed from the Master state to another state.
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.127.2.30.1 | Major | communicationsAlarm(2) |
| Name | Meaning |
|---|---|
oid |
Indicates the MIB object ID of the alarm. |
VrrpIfIndex |
Index of the interface on which a VRRP backup group is configured |
VrId |
ID of a VRRP backup group |
IfIndex |
Index of the interface on which a VRRP backup group is configured |
IpAddress |
Router id of the router where VRRP resides |
NodeName |
Device name |
IfName |
Name of the interface where a VRRP backup group is configured |
CurrentState |
VRRP backup group status after the change:
|
ChangeReason |
Cause for the change of the VRRP backup group status |
If master/backup switchover occurs normally, services are not affected.
If master/backup switchover occurs abnormally, services may be interrupted.
Cause 1:
The master switch was faulty.
Cause 2:
The active link was faulty.
Cause 3:
The priority of the VRRP backup group on the master switch or the slave switch changed.
Cause 4:
The logical interface where the VRRP backup group resides on the master switch is deleted or the configuration of the VRRP backup group is deleted.
Cause 5:
The former master switch recovers from a fault.
Cause 6:
The former active link recovers from a fault.