WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.121 hwAPPowerFailTrap

Description

WLAN/2/AP_POWER_FAIL: OID [oid] Power become failure. (APMAC=[OPAQUE], APName=[STRING], APID=[INTEGER], APPowerId=[INTEGER], FaultID=[INTEGER], FaultReasonDesc=[STRING])

An AP's power module cannot be used.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.121	Major	equipmentAlarm (5)

Parameters

Name	Meaning
OID	Indicates the ID of a MIB object.
APMAC	Indicates the MAC address of an AP.
APName	Indicates the AP name.
APID	AP ID
APPowerId	Indicates the power module ID.
FaultID	Indicates an error code.
FaultReasonDesc	Indicates the error description.

Impact on the System

The AP may not be powered on due to lack of power.

Possible Causes

The AP's power module cannot be used due one of the following reasons:

136961: The power module fails to obtain voltage information from the I2C interface.
136962: An overvoltage occurs.
136963: An undervoltage occurs.

Procedure

Replace the power module and check whether the alarm persists.
- If so, go to step 2.
- If not, go to step 3.
Collect alarm, log, and configuration information, and contact technical support personnel.
End.

Related Information

WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.122 hwAPPowerFailResumeTrap