WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.1 hwApFaultTrap

Description

WLAN/2/AP_FAULT:OID [oid] AP changes to fault. (APMAC=[OPAQUE], APType=[STRING], APName=[STRING], APFAULTTIME=[INTEGER], APID=[INTEGER])

An RU goes offline.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.1	Major	equipmentAlarm(5)

Name	Meaning
OID	Indicates the ID of the MIB object.
APMAC	Indicates the MAC address of an AP.
APType	Indicates the AP type.
APName	Indicates the AP name.
APFAULTTIME	Indicates the number of times the AP goes offline.
APID	Indicates the AP ID.

The AC cannot manage the AP, and the AP-related services cannot work properly.

Cause 1: The AP is disconnected from the AC.

Cause 2: The AP is powered off.

Cause 3: The heartbeat packets between AP and AC are lost.

Cause 4: The AC licenses are insufficient.

Cause 5: The AC and AP versions do not match.

Check whether the AP is disconnected from the AC.
- If so, connect them.
- If not, go to Step 2.
Check whether the AP is powered off.
- If so, power on the AP.
- If not, go to Step 3.
Check whether the AP and AC can exchange heartbeat packets.
- If not, verify network connectivity.
- If so and the alarm still exists, go to Step 4.
Run the display license resource usage command to check whether AC licenses are sufficient.
- If so, go to Step 5.
- If not, apply for more AC licenses.
Run the display ap all command to check whether the AC and AP versions match.
- If so, go to Step 6.
- If not, upgrade the AC and AP to matching versions.
Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
End.